LinPlug SaxLab2 AU VSTi RTAS V213 Mac OS X: How to Create and Edit Realistic and Expressive Saxophone Sounds
LinPlug SaxLab2 AU VSTi RTAS V213 Mac OS X Review: A Saxophone Synth for Every Occasion
If you are looking for a realistic and expressive saxophone synthesizer plug-in for your Mac OS X, you might want to check out LinPlug SaxLab2. This plug-in is designed to emulate various types of saxophones, from soprano to baritone, with high-quality sound and flexible control. Whether you want to create smooth jazz melodies, funky riffs, or ambient pads, LinPlug SaxLab2 can help you achieve your musical goals.
LinPlug SaxLab2 AU VSTi RTAS V213 Mac OS X
Introduction
LinPlug SaxLab2 is a saxophone synthesizer plug-in that uses physical modeling and sample-based synthesis techniques to create realistic and dynamic saxophone sounds. It is compatible with AU, VST, and RTAS formats, and works with any host software that supports them. You can use it as a standalone instrument or as a plug-in in your DAW.
Some of the main features of LinPlug SaxLab2 are:
Four different saxophone models: Soprano, Alto, Tenor, and Baritone.
Two sound generators per voice: Subtone (sample-based) and Overtone (physical modeling).
Adjustable parameters for each sound generator: Level, Tune, Detune, Pan, Vibrato Depth, Vibrato Speed, Vibrato Delay, Formant Shift, Noise Level, Noise Color, Breath Noise Level.
Two multimode filters per voice: Low Pass, High Pass, Band Pass, Band Reject.
Two envelope generators per voice: Amplitude Envelope and Filter Envelope.
Two LFOs per voice: LFO1 (sine wave) and LFO2 (triangle wave).
Four effects per voice: Reverb, Delay, Chorus/Flanger, Phaser/Distortion.
Global parameters: Volume, Pan, Pitch Bend Range, Glide Time, Glide Mode (on/off), Polyphony (mono/poly), Legato Mode (on/off), Microtuning (on/off), Breath Controller (on/off).
Preset browser with over 200 factory presets and the ability to create and save your own presets.
With LinPlug SaxLab2, you can create a wide range of saxophone sounds, from realistic to synthetic, from smooth to edgy, from simple to complex. You can also customize and tweak every aspect of the sound to suit your preferences and needs. You can even layer and blend different saxophone models to create unique and rich textures.
If you are interested in using LinPlug SaxLab2 for your music production or performance, you can get it from the official website for $99 USD. You can also download a free demo version to try it out before buying. The installation process is simple and straightforward, and you can find detailed instructions in the user manual.
Overview of LinPlug SaxLab2 Interface and Controls
LinPlug SaxLab2 has a user-friendly and intuitive interface that allows you to access and adjust all the parameters and functions easily. The interface consists of six main modules: Sound, Envelope, LFO, Effects, Settings, and Preset Browser. You can switch between them by clicking on the tabs at the top of the window.
The Sound module is where you can choose and blend the saxophone models and sound generators for each voice. You can select the saxophone model from the drop-down menu at the top left corner, and adjust the level, tune, detune, pan, vibrato, formant shift, noise level, noise color, and breath noise level for each sound generator using the knobs and sliders below. You can also mute or solo each sound generator by clicking on the buttons at the bottom.
The Envelope module is where you can shape the amplitude and filter envelopes for each voice. You can adjust the attack, decay, sustain, and release (ADSR) parameters for each envelope using the knobs and sliders below. You can also invert or sync each envelope by clicking on the buttons at the bottom.
The LFO module is where you can modulate various parameters with different waveforms for each voice. You can select the waveform (sine or triangle) for each LFO from the drop-down menu at the top left corner, and adjust the speed, depth, delay, phase, and sync for each LFO using the knobs and sliders below. You can also assign each LFO to modulate different parameters (level, tune, pan, filter cutoff, filter resonance) by clicking on the buttons at the bottom.
The Effects module is where you can add reverb, delay, chorus/flanger, phaser/distortion effects for each voice. You can adjust the level, time, feedback, rate, depth, mix, tone, drive, and mode for each effect using the knobs and sliders below. You can also bypass or solo each effect by clicking on the buttons at the bottom.
The Settings module is where you can fine-tune the performance and expression settings for each voice. You can adjust the volume, pan, pitch bend range, glide time, glide mode, polyphony, legato mode, microtuning, and breath controller for each voice using the knobs and sliders below. You can also load and save different settings presets from the drop-down menu at the top left corner.
The Preset Browser module is where you can access and manage the sound library for LinPlug SaxLab2. You can browse, load, save, rename, delete, and organize presets using the buttons and menus below. You can also search for presets by name, category, or author using the search box at the top right corner.
How to Create and Edit Sounds with LinPlug SaxLab2
LinPlug SaxLab2 offers you a lot of flexibility and creativity when it comes to creating and editing sounds. You can start from scratch or use one of the factory presets as a starting point. You can also layer and blend different saxophone models and sound generators to create complex and rich sounds. Here are some steps to guide you through the process of creating and editing sounds with LinPlug SaxLab2:
Select a saxophone model from the Sound module. You can choose from Soprano, Alto, Tenor, or Baritone saxophones. Each model has its own characteristic sound and timbre.
Adjust the level, tune, detune, pan, vibrato, formant shift, noise level, noise color, and breath noise level for each sound generator (Subtone and Overtone) in the Sound module. You can use the Subtone generator to add more body and warmth to the sound, and the Overtone generator to add more brightness and harmonics to the sound. You can also mute or solo each sound generator to hear how they sound individually or together.
Adjust the filter cutoff, filter resonance, filter envelope amount, filter envelope velocity, filter key follow, filter type (low pass, high pass, band pass, band reject), filter slope (12 dB or 24 dB) for each filter (Filter 1 and Filter 2) in the Sound module. You can use the filters to shape the frequency spectrum of the sound and create different tonal variations. You can also mute or solo each filter to hear how they affect the sound.
Adjust the attack, decay, sustain, and release (ADSR) parameters for each envelope generator (Amplitude Envelope and Filter Envelope) in the Envelope module. You can use the envelope generators to shape the dynamics and contour of the sound over time. You can also invert or sync each envelope generator to create different effects.
Adjust the speed, depth, delay, phase, sync, waveform (sine or triangle), and modulation destination (level, tune, pan, filter cutoff, filter resonance) for each LFO (LFO1 and LFO2) in the LFO module. You can use the LFOs to modulate various parameters with different waveforms and create rhythmic and dynamic variations. You can also assign each LFO to different parameters by clicking on the buttons at the bottom.
Adjust the level, time, feedback, rate, depth, mix, tone, drive, and mode for each effect (Reverb, Delay, Chorus/Flanger, Phaser/Distortion) in the Effects module. You can use the effects to add more ambience, space, movement, and color to the sound. You can also bypass or solo each effect to hear how they enhance the sound.
Adjust the volume, pan, pitch bend range, glide time, glide mode, polyphony, legato mode, microtuning, and breath controller for each voice in the Settings module. You can use these settings to fine-tune the performance and expression of the sound. You can also load and save different settings presets from the drop-down menu at the top left corner.
Save your sound as a preset in the Preset Browser module. You can name your preset, assign it to a category and an author, and add a description. You can also browse, load, rename, delete, and organize presets using the buttons and menus below. You can also search for presets by name, category, or author using the search box at the top right corner.
Tips and Tricks for Using LinPlug SaxLab2 Effectively
LinPlug SaxLab2 is a powerful and versatile saxophone synthesizer plug-in that can help you create amazing sounds for your music production or performance. However, there are some tips and tricks that can help you use it more effectively and efficiently. Here are some of them:
Use the MIDI Learn function to assign controllers to any parameter. You can right-click on any knob or slider and select MIDI Learn from the menu. Then you can move any MIDI controller on your keyboard or device and it will be automatically mapped to that parameter. You can also right-click on any knob or slider and select MIDI Unlearn to remove the mapping.
Use the Microtuning function to create exotic scales and tunings. You can click on the Microtuning button in the Settings module and select a tuning from the drop-down menu. You can choose from various presets or create your own custom tuning by adjusting the cents values for each note. You can also load and save different tuning presets from the drop-down menu.
Use the Breath Controller function to emulate realistic saxophone articulations. You can click on the Breath Controller button in the Settings module and connect a breath controller device to your computer. Then you can use your breath to control various parameters such as volume, filter cutoff, vibrato depth, and formant shift. You can also adjust the sensitivity and curve of the breath controller using the knobs and sliders below.
Use the Legato Mode function to create smooth transitions between notes. You can click on the Legato Mode button in the Settings module and select a mode from the drop-down menu. You can choose from Normal, Fingered, or Portamento modes. Normal mode will play each note separately, Fingered mode will play legato only when the notes are overlapping, and Portamento mode will slide from one note to another with a variable glide time.
Conclusion
LinPlug SaxLab2 is a saxophone synthesizer plug-in that can help you create realistic and expressive saxophone sounds for your Mac OS X. It offers you four different saxophone models, two sound generators, two filters, two envelope generators, two LFOs, four effects, and various performance and expression settings. You can also use the MIDI Learn, Microtuning, Breath Controller, and Legato Mode functions to enhance your sound design and playing experience. You can also access and manage a large sound library with over 200 factory presets and your own custom presets.
LinPlug SaxLab2 is suitable for any music genre and style that requires saxophone sounds, such as jazz, funk, soul, pop, rock, ambient, electronic, and more. You can use it as a standalone instrument or as a plug-in in your DAW. You can also layer and blend different saxophone models and sound generators to create unique and rich sounds.
If you want to learn more about LinPlug SaxLab2 and hear some audio demos, you can visit the official website at https://www.linplug.com/saxlab.html. You can also download a free demo version to try it out before buying. The full version costs $99 USD and comes with a lifetime license and free updates.
FAQs
Here are some common questions and answers about LinPlug SaxLab2:
Q: What are the system requirements for LinPlug SaxLab2?
A: LinPlug SaxLab2 requires Mac OS X 10.6 or higher, an Intel processor, 1 GB of RAM, 300 MB of disk space, and an AU, VST, or RTAS compatible host software.
Q: How do I activate LinPlug SaxLab2?
A: After you purchase LinPlug SaxLab2 from the official website, you will receive an email with a download link and a serial number. You need to download and install LinPlug SaxLab2 on your computer, and then enter the serial number when prompted. You can activate LinPlug SaxLab2 on up to three computers with the same serial number.
Q: How do I update LinPlug SaxLab2?
A: You can check for updates by clicking on the About button in the Preset Browser module. If there is a new version available, you will see a download link and instructions on how to update LinPlug SaxLab2. You can also visit the official website to check for updates manually.
Q: How do I get support for LinPlug SaxLab2?
A: You can get support for LinPlug SaxLab2 by visiting the official website and clicking on the Support button. You can find a user manual, a video tutorial, a FAQ section, a forum, and a contact form. You can also email support@linplug.com for any questions or issues.
Q: How do I get more sounds for LinPlug SaxLab2?
A: You can get more sounds for LinPlug SaxLab2 by creating your own presets or downloading presets from other users. You can find some free presets on the official website or on other websites such as https://www.kvraudio.com/banks.php?s=dl&id=1120. You can also buy some commercial presets from third-party sound designers such as https://www.loopmasters.com/genres/46-Downtempo/products/1009-Sax-Lab-Soundbank-1.
dcd2dc6462